INNOVATION THAT MAKES SENSE !
Making 300 Series Stainless Steel Workable Guaranteed !
Video #1 of 3
Never Gall Bolt and Nut
Coating
* Torque wrench test 50 - 150 ft/lbs
* 2 rounds of 11 times = 22
tightening / loosening cycles
* No Failure
Video #2 of 3
Never Gall Bolt and Nut
Coating
Impact Driver at 290 ft/lbs
Video #3 of 3
Never Gall Bolt and Nut Coating
- 8 Strikes with steel chisel
- Impact Driver 5 cycles On/OffSocket wrench over threads
"This could be the last
bolt and nut
you will ever buy!"
Then we
used the
same bolt and nut
->
Then we
used the
same bolt and nut
->
Video # 4
Never Gall Bolt and Nut
Coating
- Never Gall Coated 304 S/S B&N
- 2 Part Marine Epoxy Paint
- Easily removed with minimal effort
- Leaves clean Bolt and Nut Thread